11-10-10.   Builder's energy efficiency disclosure statement. The disclosure form required in § 11-10-8 shall read as follows:

BUILDER'S ENERGY EFFICIENCY DISCLOSURE STATEMENT
Builder ______________________________________________________
Property Address ______________________________________________
______________________________________________
This Disclosure Statement concerns the real property identified above situated in the City of _______________ County of ____________, State of South Dakota.

     Part 1. Builder shall provide the following information about the new residential building:
1. Has this new residential building been built or will it be built to meet the energy efficiency standards of the International Energy Conservation Code of 2009 (IECC 2009)?
Yes ______ No ______
2. Has this new residential building received or will it receive any other energy efficient certification?
Yes ______ No ______
If yes, which certification(s): ______________________________________

     Part 2. Builder shall describe the following energy efficiency elements of the new residential building:

	Actual	2009 IECC*	2009 IECC*
	Value	Zone 5	Zone 6
Wall Insulation R-Value	________	R-20 (or R-13	R-20 (or R-13
		cavity + R-5 insulated	cavity + R-5 insulated
		sheathing)	sheathing)
Attic Insulation R-Value	________	R-38	R-49
Foundation Insulation R-Value
Basement Walls	________	R-10/13**	R-15-19**
Crawlspace Walls	________	R-10/13**	R-10/13**
Slab-on-Grade	________	R-10, 2 ft. depth	R-10, 4 ft. depth
Floors over Unheated Spaces	________	R-30	R-30
Window U-Value	________	0.35	0.35
Door U-Value	________	0.35***	0.35***

     Part 3. Builder shall provide the following information about equipment:
1. Does the new residential building contain an Energy Star certified:
a. Water heater?
Yes ______ No ______
b. Heating system (furnace, heat pump, or other)?
Yes ______ No ______
c. Cooling system (air conditioner, heat pump, or other)?

---

Yes ______ No ______

     Part 4. Builder's Notes and Comments:
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
*IECC stands for International Energy Conservation Code.
**The first R-Value applies to continuous insulation; the second to framing cavity insulation.
***One opaque door per building is exempt from this requirement.

Source: SL 2009, ch 63, § 4; SL 2011, ch 72, § 6.

---